Opiniones de PINpoint MES

PINpoint

Puntos a favor:

Customization, User Interface for the operator and background configuration, rigorous data architecture and schema, and capacity changes are simpler

Puntos en contra:

Changing a production schedule like break start and end times, Operator maintenance, if your production floor speaks two languages you have to favor one.

PINpoint enabling aerospace manufacturing execution

Comentarios: I'd recommend PINpoint to anyone looking to integrate factory floor equipment and tooling into your operations. Great team and excellent software experience!

Puntos a favor:

[sensitive content hidden] and the team from PINpoint have been working with us for over 15 years. The product has enabled our manufacturing team to build quality into the product, especially with the integration of Atlas Copco torque tools. Operators and operations leadership can readily understand if we are running ahead or behind plan for each operation of each part being produced. Fantastic system!

Puntos en contra:

In the beginning, it did take a bit of time for our manufacturing site to grab hold of the capabilities within PINpoint so that we could leverage the capabilities to full advantage. However, the PINpoint team was always there to support us.

I have worked with pinpoint for 8 years. Sometimes it difficult to make simple changes.

Puntos a favor:

I really like how it works with KEPWARE. I also like how you can configure the hardware. The reports and relationships as well as the user management is very nice. I also like the and on aspect. Being able to send messages and quality alert to each individual station as well as being able to decide who can work where are great features.

Puntos en contra:

Not like the difficulty of the building flow and making changes on it. I also wish I could use an ethernet best I/O module like a phoenix connector without having to have a PLC. Using a smart arm does not work very well when everything is server based. Subscribing and unsubscribing to each tool for every individual tightening on a single step Really slows down the entire system. Overall the network traffic is too much which makes everything very slow.

Pinpoint use

Comentarios: It has been great. Everyone we have talked to is very knowledgeable about the system and always available if we have questions.

Puntos a favor:

The number of things it can do/record, but unfortunately, I have not had the time to take a deep dive into it to get to learn it all. Looks to be a very robust system that in the long run should work out well for our needs.

Puntos en contra:

Not the most flexible system for our applications, but we are learning new ways to make it that way. PINpoint is always open for suggestions to make it better.

I have been using PINpoint for 12 years and I am still very satisfied with it

Comentarios: I led the integration of PINpoint in our factory 12 years ago to manage multiple assembly lines. Now I support the application internally with around 400 daily users.

Puntos a favor:

Many things that I like with PINpoint, focusing on the most important ones for me, I would say the feature richness and the product reliability are excellent, ease of use is very good and the support team is very pleasant and efficient.

Puntos en contra:

Nothing that I dislike with the product but few improved functionalities I would appreciate to see in the future like better management and integration of multiple sub assembly line building elements for the final product.

PINpoint MES Review

Comentarios: The MES has addressed multiple opportunities to become a one-stop shop, we have been able to utilize PINpoint to replace other products used for ANDON, WIP tracking, etc.

Puntos a favor:

The team behind the software is very responsive and have made changes to support our production model. The software is very user friendly from an administrator stand point as well as from the use of an assembler.

Puntos en contra:

One challenge we faced was the applications focus on lean production lines vs building anywhere. There is an update set to address this challenge which will make the software even easier to use in setting up production lines.

Working with PINpoint now for 13 years... going strong!!

Comentarios: I've been fortunate enough to get to meet most all of their team, and I can't think of a nicer, more intelligent and helpful group of folks I've ever met anywhere. It doesn't matter if they are here onsite helping a facility with a project they're developing, or if I'm at their facility in Canada getting training. Their willingness to share knowledge and instruct the end users is awesome!!!

Puntos a favor:

Id say the new Dashboards available are the thing I like most about PINpoint today. What have I liked most about it over the past 13 years? That would be how easy it is to set up, program, and use to interlock our fastening process here within our facility. I also really like their universal socket trays that are ethernet IP addressable. These trays can be used with every tool that is connected to the work station. If you have an Atlas inline tool on a reaction arm, an Estic handheld digital pulse tool, and a couple of Crane Digital wrenches. They can ALL use the same tray of sockets, wrench end adapters, or whatever you want to insist is picked up to enable the tool. FAR better trays than the various OEM Mfg trays that ONLY work with the tool mfg tool they are assigned to.

Puntos en contra:

I dont want to say anything negative about PP because I truly think it's the best MES solution out there today. However, if I had to pick one thing that I'd like to see fixed or altered it would be this.... When ever anyone who has the proper rights makes a change within the SmartBuild portal of the system. Whomever makes that edit or change, has their User ID tagged to the edit. The thing is, there is no way for the end user like myself to find our who made the change without requesting that information from a PINpoint integrator to look it up for me in the database. Id like that user info to become a searchable item just like it were a tool name or a socket position ... it should be simple since each change made already has the info associated with it... but it isn't that easy and I wish it were.

Great Execution System, great system for managing process control

Comentarios: Really like PINPoint. I've worked with some MES before but had found PINpoint to be the most adaptable & versatile. Lots of support & many different methods of communicating with PINpoint. Very impressed.

Puntos a favor:

Easy user friendly features, to create products & manage in-process validation.Great support from everyone at PINpoint.

Puntos en contra:

I think there is the odd bug when sharing process steps, doesn't drop in where placed. Frequently can be found at the end. Not being able to move steps as a group (selecting multiple items) can make configuring processes a tad cumbersome.

Productivity and Quality

Comentarios: been fantastic, service is there, continous improvement happens, we are growing because of their of their product

Puntos a favor:

Our business grew 260% over the last 24 months and we could not have handled the growth in a quality controlled manner without the tools from Pinpoint.

Puntos en contra:

Operators will say it slows the process, but it really forces operators to focus and do it right the first time

PINpoint Improves Production Efficiency and Drives Down Defects

Puntos a favor:

Process control, interlock, error-proofing, ease of programming with Smartbuild, ease of integration, data management, Tracking tab in Smartscreen to manage workorders.

Puntos en contra:

Not a fan of the smartscreen operator levels yet!

Pinpoint MES is a great fit!

Comentarios: My overall experience is great. Pinpoint MES helps my production team to do the right steps in the right amount of time. I would recommend to anybody trying to optimize their manufacturing workflow and help their teams be more efficient

Puntos a favor:

I like the ease of use, great customer support, the integration with visual factory tools, and the versatility of the software

Puntos en contra:

Some of the data mining features can be a bit tricky to use. The Smartbuild software can be a little laggy.

Best Support Team MES system

Comentarios: It is good solution for small company who cannot afford big IT. Pinpoint support team help to configure the requirements

Puntos a favor:

It has lot of flexibility and no code programming which allow end user to do modified without IT help. Open to connect with any hardware that support OPC protocol. Support team is awesome, I never see the support team like PINpoint has.

Puntos en contra:

On Prem server requirements, Client application do not support auto installation for each users with scripting or RMM policies. it need to install manually for each user.

To excellence focus on continuous improvement

Comentarios: Overall experience is good but still needs improvement in UI and making it more connectable with ERP and visualization software.

Puntos a favor:

The ease of connecting the digital tools and get the data out of it

Puntos en contra:

Feasibility not to get connected to ERP systems and the AMC charges/feature charges are high.

MAnufacturing Engineeering

Comentarios: Product and support is really good and responsive when we are having issues

Puntos a favor:

I find the platform easy to use and gives us great control over our process

Puntos en contra:

There are a lot of functions and I feel we scrape the surface (OEE). We use the MES for SW on the document section, would like an easy way to upload when we update our documents

Pinpoint is great in Manufacturing

Comentarios: I was working with Pinpoint about 8 years and there was great support was provided by team. All the upgrades which we have done was very smooth and not much impact on the production and resolution provided for minor issues was timely manner.

Puntos a favor:

Application front end user interface and ease of use for the Assembly operators.

Puntos en contra:

Less connectivity with IIOT and ERP systems.

Pinpoint is a great system

Comentarios: The overall experience has provided much needed intuitive steps for operator functions

Puntos a favor:

The automatic reports, quality graphs and analysis, automatic quality gauge data collection, and SPC.

Puntos en contra:

Lack of smooth interface with torque controllers

PINpoint is The Way to Go!

Comentarios: I have used PINpoint since version 3.6 and it keeps getting better with every update. It is quite fast and easy to make larger product changes and updates.

Puntos a favor:

The system is very intuitive and easy to work with.

Puntos en contra:

One area I would like to see improved would be the Scheduler section. I would like the "save forward" to be removed and replace with the option to use those times and goal numbers until you change it again. I would also like the shifts to be shared across the plant.

System-wide deployment of MES.

Comentarios: Quality control, production process control and manufacturing tracking are improving. 3 out of our 5 primary production facilities now utilize it and it has gone relatively smoothly with Pinpoint always there to help.

Puntos a favor:

Order tracking and work-process control saw an immediate and drastic improvement. Record keeping, production analytics and the ability to control processes in an easy manner are another added benefit.

Puntos en contra:

The product could use more API entries for auxiliary functions, an addition of a web-based client interface and a real-time OPC client embedded in the product could go a long way to easing the integration of the platform to existing systems.

Martinrea MES

Comentarios: in general the MES system working well and fast

Puntos a favor:

its pretty easy to use and navigate throughout the system

Puntos en contra:

the availability of the service support is not good and the system occupy a lot of space

Been great for years.

Puntos a favor:

They have great support and it is an easy to use product with a lot of features.

Puntos en contra:

It used to be hard to get ahold of support on off hours however it has gotten a lot better.

PInpoint Hardware Config

Comentarios: Data Capturing and Control PLC and DC Tools , Etc., I am rating Overall 10/10 for Pinpoint

Puntos a favor:

Hardware Config is most helpful for to connect tools , PLC and Printers

Puntos en contra:

I am not feeling any missing in Pinpoint System

Pinpoint review

Comentarios: Assembly errors greatly reduced. The confidence in our product quality has increased substantially.

Puntos a favor:

The implementation team was very knowledgeable and helpful guiding us during the integration of Pinpoint into our production process. The followup support has been first rate, as well. This MES provides very sophisticated overwatch of our daily production.

Puntos en contra:

Mass-upload of new entries into Pinpoint system

PinPoint Review

Comentarios: The overall experience is great. The product is easy to use and the customer service is great.

Puntos a favor:

We use the product for quality control and it is very useful for training purposes.

Puntos en contra:

There are some features that would be helpful in the configuration process. A search feature and ease of linking steps would be helpful.

Cat review

Comentarios: It is good for helping t control the process.

Puntos a favor:

Pinpoint is great for helping to control the process and track the torque data.

Puntos en contra:

We have some network issues that we believe is causing the loss of data.

Review

Comentarios: Improving, quality, velocity and cost. I have always had a great experience with the PINpoint team.

Puntos a favor:

All the projects I have been on with PINpoint have gone smoothly and the support is phenomenal.

Puntos en contra:

We are not using it to its full potential.